Mimix Broadband™

Leveraging our component and integration experience allows Mimix to provide low cost GaAs semiconductor products to equipment designers that can also significantly reduce board space. Our infrastructure offerings include: gain blocks, linear PAs, LNAs and drivers. Each component covers a wide range of frequencies making them ideal for current or next generation:

2.5 or 3G Base Stations	Wireless Local Loop (WLL)	Telemetry
WiMAX	ISM	CATV
Wireless Routers	Broadband Wireless Access	More!

	.	Final – MMICs in full production
		Preliminary (Pre-production) – Full device characterization completed and transitioning to production
		Advanced – Product in development; samples may be available.
		Discontinued
Markets/Notices –- Infrastructure (I) \| SatCom (S) \| Point-to-point (P) \| Defense & Space (D) \| Space Qualified (Space)

Buffer Amplifiers

Description	Part #	Frequency (GHz)	Gain (dB)	Gain Flatness (dB)	Noise Figure (dB)	Output P 1 dB (dBm)	OIP3 (dBm)	Bias (mA @ V)	Package	DXF	Markets/ Notices
Buffer Amplifier (Single Supply/QFN)	CMM2000-QT	1.5-6.0	13.0	+/-1.0	6.0 5.5	+14.0 +12.0	+24.0	35 @ 8.0 35 @ 5.0	-QT	3x3mm	I / S / P / D
Buffer Amplifier (Single Supply/QFN)	CMM9000-QT	1.5-6.0	15.0	+/-1.5	5.5 5.5	+15.0 +14.0	+25.0 +24.0	60 @ 6.0 60 @ 5.0	-QT	3x3mm	I / S / P / D
Buffer Amplifier / Gain Block	CMM-5-BD	2.0-6.0	16.5	+/- 1.0	5.5	+18.0	+28.0	100 @ 6.0	DIE	Outline S-Param	I / D
Buffer Amplifier / Gain Block	CMM-9-BD	2.0-9.0	13.0	+/- 1.5	5.5	+17.0	+27.0	80 @ 6.0	DIE	Outline S-Param	I / D Space
Buffer Amplifier / Gain Block	CMM-2-BD	2.0-10.0	12.5	+/- 0.5	5.5	+10.0	+20.0	35 @ 8.0	DIE	Outline	I / D
Buffer Amplifier	XB1007-BD	4.0-11.0	23.0	+/-1.5	4.5	+20.0	+30.0	100 @ 4.0	DIE	Outline	I / P
Buffer Amplifier (QFN)	XB1007-QT	4.0-11.0	23.0	+/-1.5	4.5	+20.0	+31.0	100 @ 4.0	-QT	3x3mm Layout S-Param	I / S / P
Buffer Amplifier (Single Supply/QFN)	CMM0511-QT	5.0-14.0	20.0	+/- 1.1	7.0	+11.0	+22.0	90 @ 6.0	-QT	3x3mm S-Param	I / S / P / D

Distributed Amplifiers

Description	Part #	Frequency (GHz)	Gain (dB)	Gain Flatness (dB)	Noise Figure (dB)	Output P 1 dB (dBm)	OIP3 (dBm)	Bias (mA @ V)	Package	DXF	Markets/ Notices
Distributed Amplifier	CMM3020-BD	.0003-20.0	10.0	+/- 0.5	6.5	+23.0	+30.0	250 @ 8.0	DIE	Outline	I / D
Distributed Amplifier (QFN)	XD1008-QH	.0003-26.5 26.5-32.0	17.0 17.0	+/-1.0 +/-1.0	3.0 3.0	+22.5 +20.0	+32.0 +28.0	200 @ 7.0	-QH	4x4mm	I / P / D
Distributed Amplifier	CMM2030-BD	.0003-30.0	12.0	+/- 0.5	4.5	+18.0	+31.0	100 @ 5.0	DIE	Outline S-Param	I / D
Distributed Amplifier	CMM3030-BD	.0003-30.0	9.0	+/- 0.5	4.5	+23.0	+30.0	275 @ 8.0	DIE	Outline	I / D
Distributed Amplifier	XD1008-BD	.0003-40.0	15.0	+/-0.75	3.5	+22.5	+27.0	200 @ 7.0	DIE	Outline S-Param Layouts A & B	I / P / D
Distributed Amplifier (Gain Control)	XD1002-BD	0.05-50.0	9.0	+/- 1.5	5.0	+9.0	+17.0	120 @ 8.5	DIE	Outline S-Param	I / P / D
Distributed Amplifier	CMM0014-BD	2.0-22.0	11.0	+/- 0.5	7.0	+24.0	+36.0	300 @ 8.0	DIE	Outline S-Param	I / D App Note Space
Distributed Amplifier	CMM0015-BD	2.0-22.0	10.0	+/- 1.5	7.5	+28.0	+35.0	350 @ 12.0	DIE	Outline S-Param	I / D
Distributed Amplifier	CMM0016-BD	2.0-22.0	9.0	+/-1.5	7.5	+30.0	+37.0	690 @ 11.5	DIE	Outline S-Param	I / D
Distributed Amplifier (Gain Control)	XD1001-BD	18.0- 50.0	17.0	+/- 1.0	5.0	+15.0	+23.0	160 @ 5.0	DIE	Outline S-Param	I / P / D

Front-End ICs / Integrated RFICs

Part #	Frequency (GHz)	Tx P1dB (dBm)	Tx Gain (dB)	Tx OIP3 (dBm)	Rx Gain (dB)	Icc (mA)	Vd (Volts)	Package	Markets/ Notices
XZ1003-QT	0.775-1.525	+21.5	16.0 / 13.0 / 10.0	+36.0	-0.7 / -15.8	200	+3.3 to +5.0	-QT (3x3mm)	I
XZ1004-QT	0.475-0.625	+21.5	17.0 / 14.0	+34.5	-0.8 / -15.3	200	+3.3 to +5.0	-QT (3x3mm)	I

GaAs FETs, Die

Part #	Frequency (GHz)	P1dB (dBm)	MSG (dB)	OIP3 (dBm)	NF (dB)	Idss (mA)	Test Volts (V)	Rth Deg/W	Die Size (um)	Gate W/L (um)	Markets/ Notices
CF007-01-BD	DC-20.0	+16.0	18.9	+27.0	2.2	60	+3.0 to +5.5	150	420x250 S-Param	Dual Gate 300/0.5	I / S / P / D
CF010-01-BD	DC-22.0	+28.0	15.0	+38.0	-	700	+6.0	25	850x320 S-Param	2400/≤0.5	I / S / P / D
CF005-01-BD	DC-24.0	+25.0	15.5	+35.0	-	310	+6.0	50	470x320 S-Param	1200/≤0.5	I / S / P / D
CF015-11-BD	DC-24.0	+25.0	16.0	+33.0	-	310	+6.0	40	1350x250 S-Param	1200/≤0.3	I / S / P / D
CF003-01-BD	DC-26.0	+22.0	15.0	+32.0	1.8	180	+3.0 to +6.0	80	720x250 S-Param	600/0.3	I / S / P / D Space
CF001-01-BD	DC-32.0	+19.0	17.5	+29.0	1.6	60	+3.0 to +6.0	150	400x250 S-Param	300/0.3	I / S / P / D Space
CF003-03-BD	DC-34.0	+20.0	15.5	+30.0	1.0	180	+3.0 to +6.0	80	720x250 S-Param	600/0.3	I / S / P / D Space
CF001-03-BD	DC-40.0	+17.0	18.5	+27.0	0.8	60	+3.0 to +6.0	150	400x250 S-Param	300/0.3	I / S / P / D Space
CF004-01-BD	DC-40.0	+15.0	15.0	+25.0	2.2	30	+3.0 to +6.0	300	230x250	150/0.3	I / S / P / D
CF004-03-BD	DC-45.0	+13.0	16.0	+23.0	1.5	30	+3.0 to +6.0	300	230x250	150/0.3	I / S / P / D Space
Unless otherwise specified, data is @ 12 GHz

Gain Blocks: InGaP HBT

Part #	Freq (GHz)	P1dB (dBm)	Gain (dB)	OIP3 (dBm)	NF (dB)	Icc (mA)	Vd / Vs (Volts)	Rth Deg/W	Package	DXF	Markets/ Notices
CGB7289-BD (@ 2140 MHz)	DC-2.5	+23.7	13.5	+41.0	5.5	115	+4.76 / +7.0	35	DIE	Outline	I / S / P / D App Note
CGB7389-SC (@ 2450 MHz)	DC-2.7	+23.5	13.0	+40.5	4.5	115	+5.3 / +7.0	35	-SC	-SC S-Param Tape & Reel	I / S / P / D
CGB7001-BD	DC-6.0	+14.2	20.5	+28.0	3.3	35	+4.1 / +5.0	110	DIE	Outline	I / S / P / D App Note
CGB7001-SC	DC-6.0	+14.2	20.5	+28.0	3.3	35	+4.1 / +5.0	110	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note 1, 2
CGB7001-SP	DC-6.0	+14.2	20.5	+28.0	3.3	35	+4.1 / +5.0	110	-SP	-SP S-Param	I / S / P / D App Note
CGB7003-BD	DC-6.0	+16.6	20.7	+31.5	2.9	50	+4.0 / +5.0	85	DIE	Outline S-Param	I / S / P / D App Note
CGB7003-SC	DC-6.0	+16.6	20.7	+31.5	2.9	50	+4.0 / +5.0	85	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note1, 2
CGB7003-SP	DC-6.0	+16.6	20.7	+31.5	2.9	50	+4.0 / +5.0	85	-SP	-SP S-Param	I / S / P / D App Note
CGB7004-BD	DC-6.0	+17.0	16.5	+32.0	3.6	62	+4.2 / +5.0	85	DIE	Outline S-Param	I / S / P / D App Note
CGB7004-SC	DC-6.0	+17.0	16.5	+32.0	3.6	62	+4.2 / +5.0	85	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note1, 2
CGB7005-BD	DC-6.0	+17.6	21.0	+32.5	3.2	63	+4.15 / +5.0	85	DIE	Outline S-Param	I / S / P / D App Note
CGB7005-SC	DC-6.0	+17.6	21.0	+32.5	3.2	63	+4.15 / +5.0	85	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note1, 2
CGB7005-SP	DC-6.0	+17.6	21.0	+32.5	3.2	63	+4.15 / +5.0	85	-SP	-SP S-Param	I / S / P / D App Note
CGB7006-BD	DC-6.0	+18.0	15.2	+33.5	4.1	64	+5.08 / +7.0	80	DIE	Outline S-Param	I / S / P / D App Note
CGB7006-SC	DC-6.0	+18.0	15.2	+33.5	4.1	64	+5.08 / +7.0	80	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note 1, 2
CGB7007-BD	DC-6.0	+18.8	19.0	+34.0	4.5	67	+4.95 / +7.0	90	DIE	Outline S-Param	I / S / P / D App Note
CGB7007-SC	DC-6.0	+18.8	19.0	+34.0	4.5	67	+4.95 / +7.0	90	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note 1, 2
CGB7008-BD	DC-6.0	+18.8	21.2	+33.5	3.2	64	+5.15 / +7.0	80	DIE	Outline S-Param	I / S / P / D App Note
CGB7008-SC	DC-6.0	+18.8	21.2	+33.5	3.2	64	+5.15 / +7.0	80	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note 1, 2
CGB7008-SP	DC-6.0	+18.8	21.2	+33.5	3.2	64	+5.15 / +7.0	80	-SP	-SP S-Param	I / S / P / D App Note
CGB7009-BD	DC-6.0	+19.2	16.8	+35.3	3.9	73	+5.4 / +7.0	80	DIE	Outline S-Param	I / S / P / D App Note
CGB7009-SC	DC-6.0	+19.2	16.8	+35.3	3.9	73	+5.4 / +7.0	80	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note 1, 2
CGB7010-BD	DC-6.0	+20.0	21.5	+35.5	3.2	75	+5.18 / +7.0	80	DIE	Outline S-Param	I / S / P / D App Note
CGB7010-SC	DC-6.0	+20.0	21.5	+35.5	3.2	75	+5.18 / +7.0	80	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note 1, 2
CGB7010-SP	DC-6.0	+20.3	21.5	+35.5	3.2	75	+5.18 / +7.0	80	-SP	-SP S-Param	I / S / P / D App Note
CGB7011-BD	DC-6.0	+21.0	21.7	+36.0	3.4	82	+5.4 / +7.0	80	DIE	Outline S-Param	I / S / P / D App Note
CGB7011-SC	DC-6.0	+21.0	21.7	+36.0	3.4	82	+5.4 / +7.0	80	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note 1, 2
CGB7011-SP	DC-6.0	+21.0	21.7	+36.0	3.4	82	+5.4 / +7.0	80	-SP	-SP S-Param	I / S / P / D App Note
CGB7012-BD	DC-6.0	+20.3	15.7	+36.0	4.3	83	+5.48 / +7.0	80	DIE	Outline S-Param	I / S / P / D App Note
CGB7012-SC	DC-6.0	+20.3	15.7	+36.0	4.3	83	+5.48 / +7.0	80	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note 1, 2
CGB7015-BD	DC-6.0	+21.1	23.0	+37.0	4.0	92	+4.8 / +7.0	80	DIE	Outline	I / S / P / D App Note
CGB7015-SC	DC-6.0	+21.1	23.0	+37.0	4.0	92	+4.8 / +7.0	80	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note
CGB7016-BD	DC-6.0	+18.4	22.4	+34.0	3.8	78	+4.3 / +5.0	85	DIE	Outline	I / S / P / D App Note
CGB7016-SC	DC-6.0	+18.4	22.4	+34.0	3.8	78	+4.3 / +5.0	85	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note
CGB7014-BD	DC-8.0	+20.3	24.5	+36.0	3.5	80	+4.75 / +7.0	80	DIE	Outline	I / S / P / D App Note
CGB7014-SC	DC-8.0	+20.3	24.5	+36.0	3.5	80	+4.75 / +7.0	80	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note 1, 2
CGB7017-BD	DC-8.0	+18.2	23.1	+33.8	3.3	70	+4.5 / +5.0	85	DIE	Outline	I / S / P / D App Note
CGB7017-SC	DC-8.0	+18.2	23.1	+33.8	3.3	70	+4.5 / +5.0	85	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note 1, 2
Unless otherwise specified, data is @ 900 MHz Vs is supply voltage *balanced configuration

Gain Blocks: MESFET

Part #	Freq (GHz)	P1dB (dBm)	Gain (dB)	OIP3 (dBm)	NF (dB)	Icc (mA)	Vd (Volts)	Rth Deg/W	Package	DXF	Markets/ Notices
CMM6003-SC	0.05-0.9	+22.0	17.0	+41.0	1.6	150	+3.0 to +5.0	59	-SC	-SC S-Param Tape & Reel	I / S / P / D
CMM6001-BD	0.05-3.0	+20.5	12.5	+37.0	2.8	75	+3.0 to +5.0	65	DIE	Outline	I / S / P / D
CMM6001-SC	0.05-3.0	+20.5	12.5	+37.0	2.8	75	+3.0 to +5.0	65	-SC	-SC S-Param Tape & Reel	I / S / P / D
CMM6004-BD	0.05-3.0	+23.0	16.5	+41.0	1.8	150	+3.0 to +5.0	52	DIE	Outline	I / S / P / D
CMM6004-SC	0.05-3.0	+23.0	16.5	+41.0	1.8	150	+3.0 to +5.0	52	-SC	-SC S-Param I-V Curves Tape & Reel	I / S / P / D Notice
CDQ6004-QS (dual channel*)	0.05-4.0	+23.0 (+26.0*)	16.5	+41.0 (+44.0*)	2.1	150	+3.0 to +5.0	52	-QS	-QS (4x4mm)	I / S / P / D
XG1001-SA (dual channel*)	0.05-4.0	+22.5 (+26.0*)	13.0	+41.0 (+44.0*)	2.1	150	+3.0 to +5.0	27	-SA	-SA (SOIC-8) S-Param	I / S / P / D
CMM6004-AH (@ 2 GHz)	0.05-6.0	+23.0	15.0	+41.0	1.7	150	+3.0 to +5.0	50	-AH	-AH (3x3mm) S-Param	I / S / P / D
CMM2308-AJ	0.8-2.7	+17.0	19.0	+27.0	2.2	75	+3.0 to +6.0	55	-AJ	-AJ (SOIC-8) S-Param	I / S / P / D Space
CMM2306-AJ	0.8-2.7	+17.5	20.0	+26.0	3.5	75	+3.0 to +6.0	55	-AJ	-AJ (SOIC-8)	I / S / P / D
Unless otherwise specified, data is @ 900 MHz *balanced configuration

Low Noise Amplifiers

Description	Part #	Frequency (GHz)	Gain (dB)	Gain Flatness (dB)	Noise Figure (dB)	Output P 1 dB (dBm)	OIP3 (dBm)	Bias (mA @ V)	Package	DXF	Markets/ Notices
Low Noise Amplifier (Single Supply)	CMM1100-BD	2.0-18.0	17.0	+/-0.5	3.5	+16.0	+26.0	100 @ 5.0	DIE	Outline S-Param	I / S / P / D Space
Low Noise Amplifier (Single Supply/SMT)	CMM1100-QF	2.0-18.0	15.0	+/-1.0	3.8	+15.0	+25.0	100 @ 5.0	-QF	4x4mm S-Param Layout	I / S / P / D
Low Noise Amplifier (Single Supply)	CMM4000-BD	2.0-18.0	8.5	+/- 0.5	4.5	+19.0	+29.0	115 @ 5.0	DIE	Outline S-Param	I / S / D
Low Noise Amplifier (QFN)	XL1007-QT	3.5-8.0	12.0	+/- 2.0	2.0	+10.0	+25.0	33 @ 3.0	-QT	3x3mm	I / S
Low Noise Amplifier	XL1010-BD	20.0-38.0	17.0	+/-2.0	3.0	-	-	45 @ 4.0	DIE	-	I / S / P / D
Low Noise Amplifier (QFN)	XL1010-QT	20.0-38.0	17.0	+/-2.0	3.0	-	-	45 @ 4.0	-QT	3x3mm Layout S-Param	I / S / P / D

Low Noise GaAs FETs, Packaged

Part #	Freq (GHz)	Gain (dB)	Noise Figure (dB)	Output P1dB (dBm)	OIP3 (dBm)	Bias (mA @ V)	Package	Markets/ Notices
CDQ0303-QS (dual channel*)	DC-10.0	23.5	0.5	+17.0 (+20.0*)	+32.0 (+35.0*)	50 @ 3.0	-QS (4x4mm) S-Param	I / D
CFP0103-SP	DC-10.0	22.0	0.5	+17.0	+29.0	40 @ 3.0	-SP (SOT-86)	I / D
CFP0303-SP	DC-10.0	22.0	0.5	+17.0	+32.0	60 @ 3.0	-SP (SOT-86)	I / D
CFS0103-SB	DC-10.0	22.0	0.5	+17.0	+29.0	40 @ 3.0	-SB (SOT-343) S-Param	I / D App Note
CFS0303-SB	DC-10.0	22.4	0.2	+17.0	+32.0	60 @ 3.0	-SB (SOT-343) S-Param & More	I / D
CFB0101-B	DC-15.0	21.5	1.0	+18.5	+28.0	40 @ 6.0	-B (Micro-X)	I / D
CFB0103-B	DC-15.0	22.0	0.7	+19.0	+29.0	15 @ 3.0	-B (Micro-X) S-Param	I / D
CFB0301-B	DC-15.0	17.0	0.8	+21.0	+34.0	70 @ 4.0	-B (Micro-X) S-Param	I / D
CFB0303-B	DC-15.0	20.0	0.5	+21.0	+34.0	75 @ 4.0	-B (Micro-X) S-Param	I / D
CFA0101-A (@ 12 GHz)	DC-18.0	9.5	2.8	+19.5	+28.0	40 @ 6.0	-A (Micro-X, Hermetic)	I / D Space
CFA0103-A (@ 12 GHz)	DC-18.0	11.0	0.7	+19.5	+29.0	15 @ 3.0	-A (Micro-X, Hermetic)	I / D Space
CFC0301-C (@ 12 GHz)	DC-18.0	10.0	2.6	+23.0	+34.0	80 @ 6.0	-C (Flange)	I / D Space
Unless otherwise specified, data is @ 2 GHz *balanced configuration

Medium Power Amplifiers

Part #	Freq (GHz)	P1dB (dBm)	Gain (dB)	OIP3 (dBm)	NF (dB)	Icc (mA)	Vd / Vs (Volts)	Rth Deg/W	Package	DXF	Markets/ Notices
CGB7289-SC (@ 2140 MHz)	DC-2.5	+23.7	13.5	+41.0	5.5	115	+4.76 / +7.0	35	-SC	-SC S-Param Tape & Reel	I / S / P / D App Note
CGB7389-SC (@ 2450 MHz)	DC-2.7	+23.5	13.0	+40.5	4.5	115	+5.3 / +7.0	35	-SC	-SC S-Param Tape & Reel	I / S / P / D
CGB8001-SC (@ 2450 MHz)	DC-2.8	+27.0	15.5	-	3.9	150	+5.0 / +5.0	35	-SC	-SC S-Param Tape & Reel	I / S / P / D
CGB8002-SC (@ 2450 MHz)	DC-2.8	+22.5	15.8	+37.0	4.7	120	+3.3 / +3.3	35	-SC	-SC S-Param Tape & Reel	I / S / P / D
Vs is supply voltage

Multipliers

Description	Part #	RF In (GHz)	RF Out (GHz)	Pin (dBm)	Pout (dBm)	Bias (mA @ V)	DXF	Markets/ Notices
Doubler	XX1002-BD	2.5-6.0	5.0-12.0	-3.0	+16.0	125 @ 5.0	Outline	I / S / P / D
Doubler (QFN)	XX1002-QH	2.5-6.0	5.0-12.0	-3.0	+16.0	125 @ 5.0	-QH 4x4mm Layout	I / S / P / D
Doubler (QFN)	XX1000-QT	7.5-22.5	15.0-45.0	+6.0	+18.0	200 @ 5.0 / 25 @ -2.0	-QT 3x3mm	I / S / P / D
Doubler	XX1000-BD	7.5-25.0	15.0-50.0	+0.0	+15.0	200 @ 5.0 / 25 @ -2.0	Outline	I / S / P / D
Doubler	XX1007-BD	13.5-17.0	27.0-34.0	+5.0	+21.0	200 @ 5.0	Outline	I / S / P / D
Doubler (Single Supply/QFN)	XX1007-QT	13.5-17.0	27.0-34.0	+5.0	+21.0	200 @ 5.0	-QT 3x3mm	I / S / P / D
Doubler	XX1001-BD	18.0-21.0	36.0-42.0	+0.0	+26.0	530 @ 4.5	Outline	I / S / P / D
Doubler (SMT)	XX1001-QK	18.0-21.0	36.0-42.0	+0.0	+25.0	530 @ 4.5	-QK 7x7mm Layout	I / S / P / D

Power Amplifiers

Description	Part #	Frequency (GHz)	Gain (dB)	Gain Flatness (dB)	Output P1dB (dBm)	OIP3 (dBm)	Bias (mA @ V)	Package	DXF	Markets/ Notices
Power Amplifier (SOIC-8)	XP1053-SD	0.8-0.95	16.5	+/-0.25	+30.5	+41.0	420 @ 5.0	-SD	(SOIC-8) S-Param	I
Power Amplifier (SOIC-8)	XP1066-SD	1.8-2.2	11.5	+/-0.25	+30.5	+41.0	420 @ 5.0	-SD	(SOIC-8)	I
Power Amplifier	CMM0014-BD	2.0-22.0	11.0	+/- 0.5	+24.0	+36.0	300 @ 8.0	DIE	Outline S-Param	I / D App Note Space
Power Amplifier	CMM0015-BD	2.0-22.0	10.0	+/- 1.5	+28.0	+35.0	350 @ 12.0	DIE	Outline S-Param	I / D
Power Amplifier	CMM0016-BD	2.0-22.0	9.0	+/-1.5	+30.0	+37.0	690 @ 11.5	DIE	Outline S-Param	I / D
Power Amplifier (QFN)	CHV2720-QJ	2.3-2.7	11.0	+/-0.5	+37.0	-*	160 @ 12.0	-QJ	6x6mm	I
Power Amplifier	CMM3566-LC	3.4-3.5	28.0	+/- 0.5	+29.0	-	520 @ 7.0	LC	4x4mm	I
Power Amplifier	XP1044-QL	4.9-5.9	18.5	+/-0.5	+34.5	+46.0***	900 @ 8.0	-QL	7x7mm S-Param	I
Power Amplifier (QFN)	XP1039-QJ	5.6-7.1	16.6	+/-0.5	+35.5	+49.0	1.4 A @ 8.0	-QJ	6x6mm Layout S-Param	I / P
Power Amplifier (QFN)	XP1050-QJ	7.0-9.0	15.0	+/-0.5	+34.5	+48.0	1.4 A @ 8.0	-QJ	6x6mm Layout S-Param	I / P
Power Amplifier (Doubler/SMT)	XX1001-QK	18.0-21.0 (fin) 36.0-42.0 (fout)	25.0	+/- 0.5	+25.0 (Psat)	-	530 @ 4.5	-QK	7x7 mm Layout	I / S / P / D
EVM = 2.5% @ 30 dBm EVM = 2.5% @ 29 dBm **EVM = 2.5% @ 27 dBm

Power GaAs FETs, Packaged

Part #	Freq (GHz)	P1dB (dBm)	Gain (dB)	OIP3 (dBm)	Padded Eff %	Icc (mA)	Test Volts (V)	Rth Deg/W	Package	Markets/ Notices
XF1000-DB (@ 2 GHz)	DC-6.0	+34.0	14.0	+46.5	42	600	+8.0	15.0	-DB 3x6mm	I / S / D
XF1001-SC (@ 2 GHz)	DC-6.0	+30.0	15.5	+46.5	42	300	+8.0	30.0	-SC S-Param	I / S / D
CFH2162-P1	0.8-1.0	+36.0	19.0	+47.0	43	1300	+8.0	7.5	-H (Flange)	I
CFH2162-P3	1.8-2.0	+36.0	13.0	+47.0	43	1300	+8.0	7.5	-H (Flange)	I
CFH2162-P5	2.3-2.5	+35.5	10.0	+46.0	42	1300	+8.0	7.5	-H (Flange)	I

Switches

Description	Part #	Freq. (GHz)	Insertion Loss (dB)	Input P1dB (dBm)	Isolation (dB)	VSWR (dB)	Bias (mA @ V)	Markets/ Notices
Switch	CSW0118-BD	0.5-18.0	1.8	+20.0	-30	1.5:1	150 @ 3.0	I / D

Mimix Broadband, Inc. 10795 Rockley Rd., Houston, TX 77099 281.988.4600
Copyright © 2010 Mimix Broadband, Inc. All rights reserved.
Use of this site indicates you accept the Terms of Use and Privacy Statement
For comments or questions about this site, contact us.
Site Designed and Maintained by Tinsley PR